Colin McMillen
9 years ago
2 changed files with 257 additions and 1 deletions
-
256init.asm
-
2pewpew.asm
@ -0,0 +1,256 @@ |
|||
;------------------------------------------------------------------------ |
|||
;- Standard SNES initialization routine, originally by Neviksti |
|||
;------------------------------------------------------------------------ |
|||
|
|||
.MACRO InitializeSNES |
|||
sei ;disable interrupts |
|||
clc ;switch to native mode |
|||
xce |
|||
|
|||
REP #$38 ; mem/A = 16 bit, X/Y = 16 bit |
|||
;decimal mode off |
|||
|
|||
LDX #$1FFF ;Setup the stack |
|||
TXS ;Transfer Index X to Stack Pointer Register |
|||
|
|||
;do the rest of the initialization in a routine |
|||
JSL $008000 |
|||
|
|||
SEP #$20 ; mem/A = 8 bit |
|||
.ENDM |
|||
|
|||
;---------------------------------------------------------------------------- |
|||
|
|||
.BANK 0 SLOT 0 |
|||
.ORG 0 |
|||
.SECTION "InitializeSNESCode" FORCE |
|||
|
|||
InitializeSNES: |
|||
PHK ;set Data Bank = Program Bank |
|||
PLB |
|||
|
|||
LDA #$0000 ;set Direct Page = $0000 |
|||
TCD ;Transfer Accumulator to Direct Register |
|||
|
|||
LDX $1FFD ;we clear all the mem at one point ... |
|||
STX $4372 ;so save the return address in a place that won't get overwritten |
|||
LDX $1FFF |
|||
STX $4374 |
|||
|
|||
SEP #$20 ; mem/A = 8 bit |
|||
REP #$10 |
|||
|
|||
LDA #$8F |
|||
STA $2100 ;turn screen off for now, set brightness to normal |
|||
|
|||
LDX #$2101 |
|||
_Loop00: ;regs $2101-$210C |
|||
STZ $00,X ;set Sprite,Character,Tile sizes to lowest, and set addresses to $0000 |
|||
INX |
|||
CPX #$210D |
|||
BNE _Loop00 |
|||
|
|||
_Loop01: ;regs $210D-$2114 |
|||
STZ $00,X ;Set all BG scroll values to $0000 |
|||
STZ $00,X |
|||
INX |
|||
CPX #$2115 |
|||
BNE _Loop01 |
|||
|
|||
LDA #$80 ;reg $2115 |
|||
STA $2115 ; Initialize VRAM transfer mode to word-access, increment by 1 |
|||
|
|||
STZ $2116 ;regs $2117-$2117 |
|||
STZ $2117 ;VRAM address = $0000 |
|||
|
|||
;reg $2118-$2119 |
|||
;VRAM write register... don't need to initialize |
|||
|
|||
STZ $211A ;clear Mode7 setting |
|||
|
|||
LDX #$211B |
|||
_Loop02: ;regs $211B-$2120 |
|||
STZ $00,X ;clear out the Mode7 matrix values |
|||
STZ $00,X |
|||
INX |
|||
CPX #$2121 |
|||
BNE _Loop02 |
|||
|
|||
;reg $2121 - Color address, doesn't need initilaizing |
|||
;reg $2122 - Color data, is initialized later |
|||
|
|||
LDX #$2123 |
|||
_Loop03: ;regs $2123-$2133 |
|||
STZ $00,X ;turn off windows, main screens, sub screens, color addition, |
|||
INX ;fixed color = $00, no super-impose (external synchronization), |
|||
CPX #$2134 ;no interlaced mode, normal resolution |
|||
BNE _Loop03 |
|||
|
|||
;regs $2134-$2136 - multiplication result, no initialization needed |
|||
;reg $2137 - software H/V latch, no initialization needed |
|||
;reg $2138 - Sprite data read, no initialization needed |
|||
;regs $2139-$213A - VRAM data read, no initialization needed |
|||
;reg $213B - Color RAM data read, no initialization needed |
|||
;regs $213C-$213D - H/V latched data read, no initialization needed |
|||
|
|||
STZ $213E ;reg $213E - might not be necesary, but selects PPU master/slave mode |
|||
;reg $213F - PPU status flag, no initialization needed |
|||
|
|||
;reg $2140-$2143 - APU communication regs, no initialization required |
|||
|
|||
;reg $2180 - read/write WRAM register, no initialization required |
|||
;reg $2181-$2183 - WRAM address, no initialization required |
|||
|
|||
;reg $4016-$4017 - serial JoyPad read registers, no need to initialize |
|||
|
|||
|
|||
STZ $4200 ;reg $4200 - disable timers, NMI,and auto-joyread |
|||
|
|||
LDA #$FF |
|||
STA $4201 ;reg $4201 - programmable I/O write port, initalize to allow reading at in-port |
|||
|
|||
;regs $4202-$4203 - multiplication registers, no initialization required |
|||
;regs $4204-$4206 - division registers, no initialization required |
|||
|
|||
;regs $4207-$4208 - Horizontal-IRQ timer setting, since we disabled this, it is OK to not init |
|||
;regs $4209-$420A - Vertical-IRQ timer setting, since we disabled this, it is OK to not init |
|||
|
|||
STZ $420B ;reg $420B - turn off all general DMA channels |
|||
STZ $420C ;reg $420C - turn off all H-MA channels |
|||
|
|||
STZ $420D ;reg $420D - ROM access time to slow (2.68Mhz) |
|||
|
|||
LDA $4210 ;reg $4210 - NMI status, reading resets |
|||
|
|||
;reg $4211 - IRQ status, no need to initialize |
|||
;reg $4212 - H/V blank and JoyRead status, no need to initialize |
|||
;reg $4213 - programmable I/O inport, no need to initialize |
|||
|
|||
;reg $4214-$4215 - divide results, no need to initialize |
|||
;reg $4216-$4217 - multiplication or remainder results, no need to initialize |
|||
|
|||
;regs $4218-$421f - JoyPad read registers, no need to initialize |
|||
|
|||
;regs $4300-$437F |
|||
;no need to intialize because DMA was disabled above |
|||
;also, we're not sure what all of the registers do, so it is better to leave them at |
|||
;their reset state value |
|||
|
|||
JSR ClearVRAM ;Reset VRAM |
|||
JSR ClearPalette ;Reset colors |
|||
|
|||
;**** clear Sprite tables ******** |
|||
|
|||
STZ $2102 ;sprites initialized to be off the screen, palette 0, character 0 |
|||
STZ $2103 |
|||
LDX #$0080 |
|||
LDA #$F0 |
|||
_Loop08: |
|||
STA $2104 ;set X = 240 |
|||
STA $2104 ;set Y = 240 |
|||
STZ $2104 ;set character = $00 |
|||
STZ $2104 ;set priority=0, no flips |
|||
DEX |
|||
BNE _Loop08 |
|||
|
|||
LDX #$0020 |
|||
_Loop09: |
|||
STZ $2104 ;set size bit=0, x MSB = 0 |
|||
DEX |
|||
BNE _Loop09 |
|||
|
|||
;**** clear WRAM ******** |
|||
|
|||
STZ $2181 ;set WRAM address to $000000 |
|||
STZ $2182 |
|||
STZ $2183 |
|||
|
|||
LDX #$8008 |
|||
STX $4300 ;Set DMA mode to fixed source, BYTE to $2180 |
|||
LDX #wram_fill_byte |
|||
STX $4302 ;Set source offset |
|||
LDA #:wram_fill_byte |
|||
STA $4304 ;Set source bank |
|||
LDX #$0000 |
|||
STX $4305 ;Set transfer size to 64k bytes |
|||
LDA #$01 |
|||
STA $420B ;Initiate transfer |
|||
|
|||
LDA #$01 ;now set the next 64k bytes |
|||
STA $420B ;Initiate transfer |
|||
|
|||
PHK ;make sure Data Bank = Program Bank |
|||
PLB |
|||
|
|||
CLI ;enable interrupts again |
|||
|
|||
LDX $4372 ;get our return address... |
|||
STX $1FFD |
|||
LDA $4374 |
|||
STA $1FFF |
|||
RTL |
|||
|
|||
wram_fill_byte: |
|||
.db $00 |
|||
|
|||
;---------------------------------------------------------------------------- |
|||
; ClearVRAM -- Sets every byte of VRAM to zero |
|||
; In: None |
|||
; Out: None |
|||
; Modifies: flags |
|||
;---------------------------------------------------------------------------- |
|||
ClearVRAM: |
|||
pha |
|||
phx |
|||
php |
|||
|
|||
REP #$30 ; mem/A = 8 bit, X/Y = 16 bit |
|||
SEP #$20 |
|||
|
|||
LDA #$80 |
|||
STA $2115 ;Set VRAM port to word access |
|||
LDX #$1809 |
|||
STX $4300 ;Set DMA mode to fixed source, WORD to $2118/9 |
|||
LDX #$0000 |
|||
STX $2116 ;Set VRAM port address to $0000 |
|||
STX $0000 ;Set $00:0000 to $0000 (assumes scratchpad ram) |
|||
STX $4302 ;Set source address to $xx:0000 |
|||
LDA #$00 |
|||
STA $4304 ;Set source bank to $00 |
|||
LDX #$FFFF |
|||
STX $4305 ;Set transfer size to 64k-1 bytes |
|||
LDA #$01 |
|||
STA $420B ;Initiate transfer |
|||
|
|||
STZ $2119 ;clear the last byte of the VRAM |
|||
|
|||
plp |
|||
plx |
|||
pla |
|||
RTS |
|||
|
|||
;---------------------------------------------------------------------------- |
|||
; ClearPalette -- Reset all palette colors to zero |
|||
; In: None |
|||
; Out: None |
|||
; Modifies: flags |
|||
;---------------------------------------------------------------------------- |
|||
ClearPalette: |
|||
PHX |
|||
PHP |
|||
REP #$30 ; mem/A = 8 bit, X/Y = 16 bit |
|||
SEP #$20 |
|||
|
|||
STZ $2121 |
|||
LDX #$0100 |
|||
ClearPaletteLoop: |
|||
STZ $2122 |
|||
STZ $2122 |
|||
DEX |
|||
BNE ClearPaletteLoop |
|||
|
|||
PLP |
|||
PLX |
|||
RTS |
|||
|
|||
.ENDS |
Write
Preview
Loading…
Cancel
Save
Reference in new issue